top of page
19787 - Surface Resistance Meter Kit

19787 - Surface Resistance Meter Kit

  • Features

    • NEW Enclosure with Rubber Grip Handles
      Thinner and narrower design is easier to hold and provides protection from drops.
    • NEW Quick Check Button
      Bypasses the 15 second electrification period to allow quick spot checks.
    • NEW Battery Compartment
      Easy-to-access compartment without the need for tooling or probes.
    • Digital Compliance Verification Surface Resistance Meter Kit*
      Measures resistance point-to-point(Rtt) or surface to ground (Rtg) of worksurfaces, flooring systems, garments, packaging, and other materials in accordance with ESD Association documents: ESD TR53, ANSI/ESD S4.1, ANSI/ESD S7.1, ANSI/ESD STM97.1 and other documents.
    • Resistance Range: Greater Than 1.0 x 103 ohms to Less Than 1.0 x 1012 (+/-10% Accuracy)
      Determines if a surface is dissipative, conductive, or insulative for ESD control applications in electronics manufacturing or handling environments.
    • Under Load Test Voltages (10V or 100V ±5%)
      Meets ANSI/ESD S20.20 resistance testing requirements for product qualification and compliance verification.
    • Selectable Test Voltage
      Switches to appropriate test voltage (10V for tests <1 x 106 or 100V for tests >1 x 106) in AUTO mode or may be fixed to at 10V in HOLD mode.
    • Ohm Values are Expressed with a Digital Mantissa and LED Exponent
      Provides an easy to read and accurate measurement.
    • Pre-set 15 Second Electrification Period in Full Test Mode
      Meets the requirements of the ANSI/ESD S4.1 testing requirements.
    • Temperature (Fahrenheit and Celsius) and Relative Humidity Measurements
      Measures temperature and relative humidity (during 15 second electrification period) as required by ANSI/ESD S20.20.
    • NIST Calibrated with Certificate
      Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on calibration of Desco products, see Calibration.
    • Made in the United States of America
  • Technical Information

    TB-3062 - 

    Digital Surface Resistance Meter Kit: Installation, Operation and Maintenance

  • Video

    Click HERE to watch video

bottom of page