top of page
50780 - SmartLog Pro, with Proximity and Barcode Readers

50780 - SmartLog Pro, with Proximity and Barcode Readers

  • Features

    • Tests the Operator’s Path-to-Ground
      Determines if the operator’s personal grounding devices are functioning correctly
    • Electronic Data Acquisition
      Creates test record database for auditing and quality control
    • Operator Identification
      Tests operators based on assigned test requirements
    • Relay Terminal
      Pairs with a turnstile, automatic door or other locking system to control access to ESD Protected Areas
    • Simultaneous Testing in Less Than 2 Seconds
      Reduces time spent testing personal grounding devices used in ESD Control Plans
    • Stand-Alone Operation
      Operators can continue performing tests even in the event of a network failure
    • Embedded CCD Barcode Scanner
      Reads code 39 and 128 by default; contact customer service for custom programming of other symbologies
    • Split Foot Plate for Testing Foot Grounders (or Shoes)
      Tests both foot grounders independently at the same time
    • NIST Calibrated with Certificate Included
      Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on the calibration of EMIT products, see the Calibration web page.
    • Made in the United States of America
      This item is made and stocked in Chino, CA.

     

    New Features

    • 5 Inch Color Touchscreen Display
      Intuitive user interface for easy test operation
    • Records Resistance Measurements, Temperature and Relative Humidity
      Tracks the performance of ESD wrist straps and footwear
    • Software Programmable Test Limits
      Use to meet the testing requirements of ANSI/ESD S20.20 or other standards
    • Embedded HID OMNIKEY® Proximity Reader
      Compatible with the following badge formats:
      • HID Prox®
      • Indala Prox
      • MIFARE® Classic
      • MIFARE DESFire® EV1
      • iCLASS®

     

    Contact EMIT customer service for information on proximity programming.


    TEAM5 Software
    TEAM5 is the most powerful and accurate ESD Test Acquisition Software on the market. When used with the SmartLog Pro™, TEAM5 allows manufacturers and assemblers to automate the collection of ESD testing. TEAM5 Software is not included with the SmartLog Pro™ and must be purchased separately.

     

    U.S. Patents 6,078,875 and 6,809,522

     

    “Compliance verification should be performed prior to each use (daily, shift change, etc.). The accumulation of insulative materials may increase the foot grounder system resistance. If foot grounders are worn outside the ESD protected area testing for functionality before reentry to the ESD protected area should be considered.” (ESD SP9.2 APPENDIX B - Foot Grounder Usage Guidance)

     

    "Compliance verification records shall be established and maintained to provide evidence of conformity to the technical requirements. The test equipment selected shall be capable of making the measurements defined in the Compliance Verification Plan." (ANSI/ESD S20.20-2014 section 7.4 Compliance Verification Plan)

  • Technical Information

    TB-6594 - SmartLog Pro™: Installation, Operation and Maintenance

  • Video

    EMIT SmartLog Pro™

    Click HERE to watch video

bottom of page