top of page


The IQ Power Nozzle is a shockless pulse DC ionizer engineered to operate at 7 kV. The IQ Power Nozzle is compatible with Simco Ion’s IQ Power Static Neutralizing system. When used with the IQ BPS Power Supply, users of the IQ Power Nozzle have worry free, one-touch setup and continuous active monitoring. The IQ Power Nozzle’s compact size allows for neutralizing surfaces in a variety of applications.

Three configurations are available:

High Efficiency (HE): Offers exceptional performance with significantly lower air consumption compared to other nozzles. Recommended for use in applications less than 18 inches from the target, where a high volume of air is not required. 

Slotted: Recommended for applications where a more focused ionized air stream is needed.

Perforated: Recommended for applications where a wider coverage area of ionization is needed.



  • Flexible installation allows multiple nozzles to be positioned on a single wire run
  • Continuous monitoring of performance and status
  • IP-66 rated against particulate and splash
  • Specifications

    Input Voltage 7 kVDC (IQ Power BPS speed mode) using specified HV cable
    Air Input 80 psi, max
    Air Input Connections Supplied 1/8 NPT straight or right angle for use with 1/4" O.D.tubing
    Air Consumption Slotted & Perforated: 10 scfm @ 30 psi
    HE: 1.25 cfm @ 30 psi
    Dimensions 2.1"L x 2.1"W x 1.3"H
    Temperature 60°C (140°F) max
    IP Rating IP-66

    The IQ Power Nozzle can be user installed in two different positions on the high voltage wiring. When installing a single nozzle it should be located at the end of the high voltage wiring in the ‘dead end’ position. Additional nozzles can be installed upstream from the dead end nozzle in the ‘in-line’ configuration. Up to four nozzles total can be placed on a single high voltage run.

  • Video

    Click HERE to watch video

  • Downloads

  • Related Products

    IQ Power BPS

    IQ Power Control Station

bottom of page